1. The Burner Is Not Operating
There are several reasons the burner may not operate, they include a lack of fuel, a thermostat that is set too low or no electrical power to the unit. If there is sufficient fuel, check for a blown fuse or tripped circuit. Next, turn the thermostat up higher by a few degrees. Also check that the filter and ductwork are not blocked or restricted and that the blower motor is operating. If the burner still won't turn on, call Air Specialties for service.2. The Burner Will Not Fire
If the burner is working, but will not fire, it could be a fuel supply problem. This can be caused by a failed oil pump or a clogged nozzle filter or oil line. Your heating technician can diagnose the cause and recommend solutions for repair.3. Smoking Burner
Smoking burners are often caused by an out of adjustment burner, a dirty or wrong type of nozzle or end cone. Other causes include a defective heat exchanger, incorrect oil pressure or an obstructed chimney. Because this is a potential safety issue, call Air Specialties to inspect the system to ensure there are no carbon monoxide leaks or other hazards.4. High Fuel Consumption
When an oil boiler is consuming too much fuel it if often because off lack of maintenance or a system that is out of adjustment. An improperly sized boiler can also cause inefficient operation and high fuel consumption. 5. Heating System Odors
Many of the same problems that can lead to a smoking boiler can cause unusual odors, including a clogged nozzle, broken heat exchanger or a burner that is out of adjustment. The chimney may also need to be cleaned. Call Air Specialties to have the heating system inspected.
Have oil boiler problems? Call Air Specialties Air Conditioning and Heating. From maintenance
and repairs to boiler replacement
, we can help keep your oil boiler running in top condition.